高效毛细管电泳电导分离-检测亮氨酸对映体

以未涂层融硅石英毛细管(50 cm×75μm)为分离柱,2 mmol/L NaAc+2mmol/L HAc+0.5 mmol/L Cu2+(pH 4.0)作为电泳运行液,分离电压15 kV,建立了亮氨酸对映体的高效毛细管电泳-电导分离检测的方法。对缓冲溶液的种类、浓度、分离电压、有机改性剂等因素对分离的影响进行了讨论。L-亮氨酸和D-亮氨酸的线性回归方程分别为:y=5.998ρ+40.677,y=3.605ρ+42.087。线性范围:L-亮氨酸4.0~160 mg/L;D-亮氨酸6.0~160 mg/L。检出限分别为:1.5和2.0 mg/L。     

米非司酮的吸附伏安特性

在ＰＨ７．０Ｂｒｉｔｔｏｎ－Ｒｏｂｉｎｓｏｎ缓冲溶液中，米非司酮（Ｍｉｆｅｐｒｉｓｔｏｎｅ，ＲＵ４８６）在汞电极上有２个不可逆的线性扫描还原峰，峰电位分别为－１．２３Ｖ和－１．６８Ｖ。本文探讨了第一峰的电化学行为。     

高效毛细管电泳电导法快速检测复方维生素B片中的VB1、VB12、VB6和VC

采用高效毛细管电泳电导法同时分离、测定了复方维生素B片中的主要成分VB1, VB12,VB6和VC的含量.研究了运行缓冲溶液的酸度和浓度、电泳电压、进样时间等因素对电泳的影响.在优化的实验条件下40 mmol/L Tris -4 mmol/L H3BO3 (pH 8.0) 的缓冲溶液中加入0.30 mmol/L CTAB(溴化十六烷基三甲基铵),分离电压为15 kV,上述4组分在5 min内得到良好的分离.维生素B1,B12,B6和VC的线性范围分别为5.5～1.0 mg/mL; 15～1.5 mg/mL; 1.0～0.40 mg/mL和6.6～0.80 mg/mL; 检测限分别为0.80 μg/mL, 4.0 μg/mL, 0.50 μg/mL, 2.9 μg/mL; 5次测定峰高的相对标准偏差分别为2.2%, 1.6%, 3.9%, 2.8%.5次测定的平均回收率分别为99%, 94%, 100%, 97%.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Thin‐Layer Cyclic Voltammetric and Scanning Electrochemical Microscopic Study of Antioxidant Activity of Ascorbic Acid at Liquid/Liquid Interface

An electron transfer reaction between ascorbic acid (H₂A) in an aqueous solution and oxidizing agent in an organic solution immiscible with water has been studied by thin‐layer cyclic voltammetry (TLCV) for charge transfer at the interface between two immiscible electrolyte solutions (ITIES). As an antioxidant, H₂A provide electrons through the aqueous/organic interface to reduce Fc⁺ and the procedure has been proved to be a one electron process again. In this work, the first combination of TLCV and scanning electrochemical microscopy (SECM) was achieved and showed a reasonable agreement between the results from the two different approaches. Otherwise, lower concentration ratios Kr of aqueous to organic reactants was adopted, which is given as evidence to the proposed procedure of Barker.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

Supercritical fluid chromatography of petroleum products using flameless sulfur chemiluminescence detection

Supercritical fluid chromatography using flameless sulfur chemiluminescence detection has been investigated for the analysis of sulfur compounds in petroleum products. The chromatography and detection system was easy to implement and exhibited good precision, linearity, selectivity, and sensitivity. A minimum detectable limit of 0.3 pg sulfur/s was obtained, and response to sulfur in different sulfur species was nearly equimolar.     

An LCEC method for the analysis of synthetic amino acids in fruit juices

Summary A fast and simple HPLC-method for the determination of synthetic amino acids in adulterated orange juice has been developed. The amino acid enantiomers were derivatized with a chiral reagent and the derivatives separated on a 3 m particle size C₁₈ column. An electrochemical detector operating in the oxidative mode was used for detection. The potential at which the derivatives are oxidized was determined by cyclic voltammetry.By using selective (electrochemical) detection it is possible to reduce the sample clean-up to simple centrifugation and filtration steps.